Every charger on a commercial site records how it is used: when sessions start, how much energy they deliver, how long vehicles stay connected and when equipment goes offline. Property owners, workplace and apartment managers, fleet operators and charge point operators (CPOs) rely on those records to set pricing, plan capacity, schedule maintenance and decide where to expand.
This article sets out the metrics worth tracking, what each one tells you about your site, and how to review them as a routine. It applies to a single workplace car park and to a multi-site network alike.
Where Does EV Charging Data Come From?
Each charger reports to a backend management platform, which records sessions, charging power and equipment status. A single platform that covers every charger on a site gives you one set of records to work from, rather than separate figures from each unit. Our backend management software integrates with more than 400 AC and DC chargers and provides monitoring, billing, load management, energy analytics and KPI reporting from a single interface.
We build to the open OCPI standard, so live authorisation, session tracking and billing also work across other operators, roaming platforms and driver apps.
Which EV Charging Metrics Should You Track?
Seven measurements cover most of what a site owner or operator needs to know.
| Metric | Unit | What it tells you | Most relevant to |
| Energy per session | kWh | How much electricity each session delivers, and the basis for billing | All site types |
| Session duration | Minutes | How long each bay is occupied | Retail, workplace, public sites |
| Idle time | Minutes | How long a vehicle stays connected after charging finishes | Workplace, apartment, retail |
| Bay utilisation | % of time in use | Whether the site has too few or too many chargers | Public, retail, workplace |
| Peak demand | kW | The highest load on the site supply, and how close it comes to capacity | All site types |
| Availability | % uptime | How much of the time chargers are working and ready for drivers | CPOs, public networks |
| Revenue per kWh | $ per kWh | Whether pricing covers energy costs and generates the margin you need | CPOs, charging as a service operators |
Track these together. High utilisation with long idle times points to a different fix than high utilisation with short sessions, and peak demand only makes sense when read against the capacity of your supply.
How Does Utilisation Data Guide Expansion and Pricing?
Utilisation by hour of day and day of week shows when your chargers are busy and when they are not. If bays sit unused for most of the week, the issue may be location, signage, pricing or the mix of AC and DC chargers. If every bay is occupied at the same times, drivers are queueing and additional chargers have a clear case.
Idle time deserves its own review since a vehicle that stays plugged in after charging finishes occupies a bay that another driver could use. Idle fees, time limits and notifications to drivers all address this, and your session records show which sites need them.
Pricing follows the same logic, so compare revenue per kWh with your energy cost per kWh, then adjust. Our platform supports flexible pricing models, so you can change tariffs by time of day, by user group or by site as usage data shows what works.
What Does Load Data Say About Your Site Capacity?
Peak demand is the figure that links your charging data to your electrical infrastructure. When several vehicles charge at once, the combined load can approach the limit of the site supply. Your records show how often that happens, at what time and on which days.
Many commercial tariffs include charges that depend on peak demand, so a high peak affects cost as well as capacity. Load management addresses both by sharing available power between chargers and by scheduling charging into off-peak periods.
Why Do Uptime and Fault Data Matter?
Drivers judge a charging site by whether a charger works when they arrive. Availability figures, fault codes and repeat issues on the same unit show where reliability is slipping. A charger that records the same fault several times is a candidate for maintenance before it fails again.
Our report indicate charging infrastructure uptime above 95%, which is supported by AI-driven predictive maintenance that flags faults before they take a charger offline, and real-time availability monitoring with driver alerts.
How Does Data Support Billing and Reporting?
Session records are the basis for billing. Fleet operators use energy per vehicle and cost per vehicle to understand running costs. Apartment managers use per-user records to bill residents for the energy they use. Workplaces use them to separate staff, visitor and company vehicle charging.
Our platform automates invoicing and real-time session tracking, and provides KPI dashboards and green energy certification, which tracks and reports renewable energy consumption across a network for sustainability reporting. Operators and property owners can also offer drivers a branded mobile app with integrated payments and session-level usage data, built on an OCPI-compliant platform.
A Data Review for Your Site This Month
Use this checklist to turn your records into decisions.
- Export four weeks of session records for every charger.
- Calculate utilisation by hour of day and day of week.
- Identify your peak demand and compare it with the capacity of your supply.
- Compare revenue per kWh with your energy cost, and review idle time.
- List every fault and period of downtime, and note repeat issues by charger.
- Decide the next step: adjust pricing, introduce load management, schedule maintenance or add chargers.
If the review shows that your site needs more capacity, better visibility or a different charging model, we can help. Our team designs, deploys and operates charging for commercial sites, retail and shopping centres, public networks, workplaces, apartments and fleets, including a charging as a service model for operators who want their own branded network. The team offers a free site inspection through to a full infrastructure roadmap. Contact Elanga to discuss your site.


